A side downdraft paint booth is a perfect solution for shops that cannot install a pit. This model is designed to efficiently draw filtered ceiling air down through the booth, supplying the inside with clean air. Instead of drawing the air into a pit in the floor, filtered air is drawn down the walls of the booth on both sides. Each side wall of the booth contains an exhaust fan and a filter bank to capture the overspray. With this design the air flows evenly to each side of the cabin.
Our side downdraft spray booth line is offered in a several standard sizes and configurations, which include pressurized, non-pressurized, solid back, reverse flow and drive thru designs.
Clean air flows into the intake plenum; clean air flows into the booth through the intake filters (located in the ceiling of the booth), moves downward through the work area and exits through the exhaust plenums located adjacent to the floor along the bottom of each side of the booth. Filtered exhaust air is drawn thru the exhaust plenums and discharged upward into the atmosphere through the exhaust stacks. This booth is provided complete, with all necessary hardware to meet the applicable national requirements established by OSHA, and the NFPA for paint booth construction.
Our factory trained installation crew can get your new Side Downdraft Paint Booth installed correctly and quickly.
This our specialty! You can rest assured that your new equipment will be operational in no time.
The sizes listed below are standard catalog sizes. We can custom build all of our finishing equipment to meet your needs. Call us at 800-637-4027.
Interior Dimensions | Exterior Dimensions | Access Doors | Nominal Door Opening | Lights | Air Flow | Fan Specs | Filters | ||||||||||
Width | Height | Length | Width | Height | Length | Width | Height | Qty | Type | Open | S&G | SCFM | Diameter | HP | Intake | Exhaust | |
14′ | 9′ | 26′ | 16’4″ | 9’4″ | 26’4″ | 1 | 9’4″ | 8’10.5″ | 1 | Solid | 9 | 1 | 12,600 | (2) 24″ | 2Hp | 32 | 20 |
14′ | 9′ | 26′ | 16’4″ | 11’2″ | 26’4″ | 1 | 9’4″ | 8’10.5″ | 1 | Solid | 9 | 1 | 12,600 | (2) 24″ | 2Hp | 56 | 20 |
14′ | 9′ | 26′ | 16’4″ | 11’2″ | 26’4″ | 1 | 9’4″ | 8’10.5″ | 1 | Solid | 9 | 1 | 12,600 | (2) 24″ | 2Hp | 32 | 20 |
14′ | 9′ | 26′ | 16’4″ | 9’4″ | 26’4″ | 1 | 9’4″ | 8’10.5″ | 2 | Solid | 9 | 1 | 12,600 | (2) 24″ | 2Hp | 32 | 20 |
14′ | 9′ | 26′ | 16’4″ | 11’2″ | 26’4″ | 1 | 9’4″ | 8’10.5″ | 2 | Solid | 9 | 1 | 12,600 | (2) 24″ | 2Hp | 32 | 20 |
This booth intakes fresh air from the filtered front doors it. The air is pulled across the parts being painted to the exhaust filter bank located at th e rear of the booth. The air is then filtered and exhausted in through the duct work.
All Our Booths NOW Have LED Lighting!
Fixtures are Maintenance-Free rated for Class I Division II Groups A, B, C, D; Class II Division II Groups F & G. Fixtures are ETL listed and approved for their intended use and placement. Lighting is provided by innovative LED technologies consisting of multiple high efficiency flux boards paired with high efficiency drivers. Fixtures are designed to accept either 120VAC or 277VAC power. Drivers and boards carry a 5-year limited warranty. To find out more about LED light fixtures, please click here.
© Copyright 2024 – Paint Booth | Terms & Conditions | Managed by Inersche